Freel2.com - View topic - Useful videos about the repair of freelander 2


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Useful videos about the repair of freelander 2

Page 3 of 4

Print this entire topic ·

Arctic

Member Since: 24 Aug 2016
Location: Westmidlands
Posts: 561

2014 Freelander 2 SD4 HSE Auto Orkney Grey

Great videos thank you for sharing, look forward to seeing more .

9th May 2018 10:01 pm

tascusi

Member Since: 19 Oct 2018
Location: pesaro
Posts: 83

2009 Freelander 2 TD4 HSE Manual Narvik Black

I would like to ask you if there is a video where you can see the dismounting and cleaning of the EGR valve.
Thank you.

26th Nov 2018 9:38 am

tascusi

Member Since: 19 Oct 2018
Location: pesaro
Posts: 83

Re: Treat the creaking window

Fg0909 wrote:
Disassemble driver door for detecting creak.

One question: I have the driver's side window that rises and lowers normally without friction. However, the command on the door no longer works when the window is pushed down and raised by itself without pressing the button. How can this be remedied?
Thank you

26th Nov 2018 9:47 am

Arctic

Member Since: 24 Aug 2016
Location: Westmidlands
Posts: 561

Fg0909 wrote:
https://youtu.be/1fT8tyIFyB4

Great video's but the pulley in this film seems to be oscillating after the car was started maybe not tightened up properly ? surely it should not bounce around like that?

26th Nov 2018 12:27 pm

alex_pescaru

Member Since: 12 Mar 2009
Location: RO
Posts: 4642

Not the pulley is oscillating, but the washer is somehow off-center, as it has a bigger hole than needed. There is no problem there.
Look at the pulley's outer edge and you'll see no wobbling. And to be sure, press pause (space) on the movie from time to time and see the washer is off-centre.
In fact the pulley can't oscillate, because its center hole is quite thick/deep and it's a tight fit on the end of the crankshaft. (see at 5:00)

26th Nov 2018 1:35 pm

Fg0909

Member Since: 22 Oct 2016
Location: Vladimir
Posts: 27

Repair of the working brake cylinder; A new video does not yet have an English translation.

26th Nov 2018 3:22 pm

Fg0909

Member Since: 22 Oct 2016
Location: Vladimir
Posts: 27

alex_pescaru wrote:
Not the pulley is oscillating, but the washer is somehow off-center, as it has a bigger hole than needed. There is no problem there.
Look at the pulley's outer edge and you'll see no wobbling. And to be sure, press pause (space) on the movie from time to time and see the washer is off-centre.
In fact the pulley can't oscillate, because its center hole is quite thick/deep and it's a tight fit on the end of the crankshaft. (see at 5:00)

All right The pulley is mounted on the crankshaft and its beating is a visual effect.

26th Nov 2018 3:23 pm

Fg0909

Member Since: 22 Oct 2016
Location: Vladimir
Posts: 27

Re: Treat the creaking window

tascusi wrote:
Fg0909 wrote:
Disassemble driver door for detecting creak.

One question: I have the driver's side window that rises and lowers normally without friction. However, the command on the door no longer works when the window is pushed down and raised by itself without pressing the button. How can this be remedied?
Thank you

If I understand the question correctly, then just try to open and close the window and hold the button up for 5 seconds when the glass closes completely until the relay clicks

26th Nov 2018 3:27 pm

Fg0909

Member Since: 22 Oct 2016
Location: Vladimir
Posts: 27

Hello friends!
This video is about repairing the hood switch. At the end of the video there are two options - short and detailed. Choose any.

29th Jan 2019 8:23 pm

I Like Chips

Member Since: 25 Jun 2017
Location: Ascott Under Wychwood
Posts: 1545

2011 Freelander 2 SD4 HSE Auto Indus Silver

29th Sep 2019 10:14 am

Texou

Member Since: 17 Jan 2021
Location: paris
Posts: 4

Hello,
Thanks for these videos.
Have you already dismount the front body of the F2 ?
I need to adjust one of the fog lamps after a small shock.
Thanks for your help and any redirection you would recommend.
Best regards.

17th Jan 2021 1:39 pm

RPoul87

Member Since: 23 Apr 2021
Location: Woking
Posts: 82

2008 Freelander 2 TD4 XS Auto Orkney Grey

Series of videos showing manifold and glow plug removal:

&list=PLw7RMgU39bLtEwjeg-km-2XwFeJsoj58w&index=18[url]

&list=PLw7RMgU39bLtEwjeg-km-2XwFeJsoj58w&index=19[/url]

&list=PLw7RMgU39bLtEwjeg-km-2XwFeJsoj58w&index=20[url][/url]

A lot of similar vids from on either the evoque or freelander 2 including haldex, diff, PTU, gear box, power steering, injectors etc etc. Corrado VR6 Mystic Blue - Gone
Freelander 2 Orkney Grey

Last edited by RPoul87 on 28th Nov 2022 11:01 am. Edited 1 time in total

28th Nov 2022 9:47 am

Arctic

Member Since: 24 Aug 2016
Location: Westmidlands
Posts: 561

The links above do not work for me ?

28th Nov 2022 10:29 am

RPoul87

Member Since: 23 Apr 2021
Location: Woking
Posts: 82

Don't think playlist or channel links work on here from the looks of it unless I'm doing it wrong?

The links from the videos should take you back to the channel and you can go through to the playlists there Corrado VR6 Mystic Blue - Gone
Freelander 2 Orkney Grey

28th Nov 2022 10:59 am

Arctic

Member Since: 24 Aug 2016
Location: Westmidlands
Posts: 561

The video links are working again for me now revisit due to buying another FL2 SD4 all oils need changing, and i am doing the belts also (Gates) with water pump, due to not being 100% when they were last done if at all 7yrs

7th Nov 2023 9:43 am

Page 3 of 4

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum