Hi,
While washing my FR 2 MY13 I noticed that the front section of the seam cover (the bit that gets taken off to fit roof rails) was loose. On lifting it up there is a rubber seal underneath but there appears no way of fixing it back in place. The one on the nearside is firmly fixed. There are no holes in the bodywork that would take a fixing as far as I can see.

Is there a way of fixing them down or was it done with silicone or something similar?

Thanks 2013 GS Baltic Blue - part exchanged now for Volvo V40

Isn't it just double-sided tape? I think I've had them come off in the past, and just taped them back on. Ex AA Series III LWB Safari - Gone
300TDi Disco (bought new - terrible car) sent back after 18 months
Freelander 1 Estate - leased, given back at end of lease
200TDi Disco (bought from a mate with 100,000 on the clock) - Gone
Disco 2 TD5 - sold and exported to France
FR2 TD4 GS - Gone
FR2 SD4 HSE - Now changed for a DS
New model ex-demo Evoque S 180 in white
Unable to order a new DS, so gave up. Now have a Volvo S90 Recharge.

Thanks PM,there is nothing under the plastic strip, seems odd there is no sign of an old fixing of any type. 2013 GS Baltic Blue - part exchanged now for Volvo V40

The guy with the tash must have sung in Village People Young Man ....................

 FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current