![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > General > Disassemble Glove Box |
![]() ![]() |
|
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1796 ![]() ![]() |
Like many people I have the annoying problem that my glove box needs a good slam to close and often pops open all on its own.
|
||
![]() |
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1796 ![]() ![]() |
Aha! I began to remove those screws but it looked like the mechanism was going to come loose inside the lid so stopped. Cheers FL2 TD4 GS 60 reg Facelift - so many issues
|
||
![]() |
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1796 ![]() ![]() |
Job done. Glove box working as it always should have. Bent the clip up a few mm and also found that the spring in the handle wasn't seated so it wasn't closing fully.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)