I'm doing a step by step for the forum as I just replaced the engine mounts on my gasoline inline 6. Can anyone here please post up the torque specs for the bolts as follows:

Rubber mount to body (3 bolts)
Rubber mount to engine plate (1bolt)
Engine plate to engine (3 bolts and 1 nut)
Top engine torque brace bolts (2 bolts)

I'd like to write up to be as complete as possible. On steel steel I pretty much just tighten up nice and snug but there's three bolts that thread into the aluminum head and I want to make sure that those torque specs are accurate. [/list]

Is this what you need

https://www.freel2.com/gallery/albums/user...ttings.pdf

Hmmmm. Hard to tell from those descriptions what is what. Here's the parts I'm talking about: the upper mounts in the pic part numbered 1 and 2 and the plate that joins both of them to the engine . Bolts labeled HB3 HS3 HB4 HS4 HS5 and nut HN1

Here's the link to the write up:

http://www.freel2.com/forum/topic27532.html