Hi does anyone know where to get a switchable feed for a dash cam. all passenger side fusebox feeds seem permanently live.
need to mount a piggyback fuseholder that is only live when ignition on?
any help appreciated.

Try this link
http://www.freel2.com/forum/topic7797-15.html

or just search on forum for 'Dash Camera'

There is a lot of info on the subject and wire runs, fuses, etc. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)

Many thanks Ianmetro - will have a look. new to the forum thang.
very helpfull

I used the 5th fuse along from the left on the top row to power my camera, remove the fuse, put it in the piggyback holder and put the piggyback holder in the existing fuse socket. This is on a 2007 model (may be different fuse on other years)

 2007 TD4 XS Manual in Sumatra Black

Ok thanks, I'll try that one. - is that a switched live then? i tried a few in that box and left them connected to a multimeter and then locked the car. After 20 mins they were all still live. i dont really want my camera permanently powered. just want on when driving.

That turns off with the ignition on mine 2007 TD4 XS Manual in Sumatra Black

Excellent - I'll grab that one then.

to be honest i think i'd metered that one out and it was dead -but then the ignition was off!!

Many thanks
much appreciated