![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Technical > Reset ECU - When changing Throttle body |
![]() ![]() |
|
|
Jim NI Member Since: 30 Mar 2010 Location: NI Posts: 447 ![]() ![]() ![]() |
http://www.freel2.com/forum/topic10246-45.html
|
||
![]() |
|
Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4109 ![]() ![]() |
I didn't reset anything when I changed mine. Never had any problems after either. Past: FL2 TD4 HSE Auto
|
||
![]() |
|
chrisFrance Member Since: 05 Apr 2016 Location: Strasbourg Posts: 2 ![]() ![]() ![]() |
Thanks for the replies, I had already read up on the process to change the part, however because it is electronically controlled I was just a little fearful that I had to reset something. |
||
![]() |
|
Jim NI Member Since: 30 Mar 2010 Location: NI Posts: 447 ![]() ![]() ![]() |
Think i remember reading that it does a 'Learn' process when changed. Worst case scenario you will need to clear fault code but could try hard reset for this. Do you know what dtc is showing? 2014 SE Loire Blue SD4 Auto (MY15)
|
||
![]() |
|
RichP Member Since: 21 Sep 2014 Location: Worcestershire Posts: 1369 ![]() ![]() ![]() |
Are you sure it is your throttle body as a split turbo hose will give the same symptoms? If your throttle body is going then your shutdown will run on longer and may splutter. If your turbo hose is split you may get excessive smoke under acceleration. |
||
![]() |
|
sergio977 Member Since: 08 Jan 2016 Location: Italy Posts: 128 ![]() ![]() ![]() |
I agree changed mine 1 week ago ![]() |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)