Talk about using a syringe to take fluids out of Haldex on topping up.

Anyone got a Syringe for this ? and where did it come from ? FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

not sure of the size you'll need but plenty on ebay for a few quid Former Mod/Member, with the most post & Chicken George Arch nemesis

As said above, eBay. I had a 100ml, came with an adapter to fit tubing to. Used aquarium air line tubing. I left the tubing fairly long so that while I was emptying the syringe some oil could siphon out. Every little helps. I didn't change the filter as I hadn't looked at the filter kit enough to realise that the end cap that is held on with the Allen screws is only a cover for the actual cap which is nylon and has an O ring on it. You'll need to remove that to get to the filter. The oil I got out was filthy so I'm going to have to get another litre from Volvo and go through the procedure again, this time being a bit more brutal to get to the filter. As said in another thread, "jam a screwdriver in".

Ordered one from Amazon. Will be useful for the lawn mower and rotavator I guess as well.  FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

When I changed my oil I used two Lamb Reviver syringes which come with 2 tubes only costs me £1.49 each.

It works I see  FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current