Just wondered if anyone's fitted a bonnet protector and if so where do you get them and any pics??

You mean what they call a mask?
Leather sleeve that fits across the front of the bonnet to stop chips like they seem to do on VWs more than anything?

See autobra.co.uk they say they do a bonnet bra for the FL2

Hi, not the leather looking bra thing but tinted plastic like what wind deflectors are made off.

Top right?

Yep that's it, is this a genuine landrover part??

The Yanks call them bug shields
https://www.4x4at.com/landrover-freelander...bug-shield No Longer the owner of a 2013MY Fuji White GS

"Fiat Lux" a philosophy not a car

Has LR Nut not got one fitted to his ? FL2 now gone and have a couple of items left for sale:-

Brodit active iPhone holder + Brodit dash clip,
Bluetooth Music Streaming Module.

http://www.autostylinguk.co.uk/products/Pr...FB/FP.html

Correct Ron. Here's mine made by egr who supply them for Land Rover! The genuine items are sold with the LAND ROVER on the bonnet guard for the D2/D3/D4. The Range Rover and Range Rover Sports one obviously have RANGE ROVER on them. Land Rover did not ask EGR to make any official bonnet protectors for the FL2 but that didn't stop EGR making them anyway. The bonnet guards tend to be market specific accessories for the USA, Australia and Middle East mainly.

Click image to enlarge

Click image to enlarge

Click image to enlarge

Not a bad idea. I've got a collection of stone chips in that area. Ex AA Series III LWB Safari - Gone
300TDi Disco (bought new - terrible car) sent back after 18 months
Freelander 1 Estate - leased, given back at end of lease
200TDi Disco (bought from a mate with 100,000 on the clock) - Gone
Disco 2 TD5 - sold and exported to France
FR2 TD4 GS - Gone
FR2 SD4 HSE - Now changed for a DS
New model ex-demo Evoque S 180 in white
Unable to order a new DS, so gave up. Now have a Volvo S90 Recharge.

Yea I like the look of that, are they stick on or bolt on??

Do they shield the bugs or collect them like them numberplates do?

Decades ago there were lots of cars wearing Car Bras, but these days cars have been liberated & look better without. I have no problem looking at hail damage!

3M make a clear protection film so you can still see everything!

The problem with bonnet protectors is leafs get stuck behind them. A bit like what girls do with their mobile phones, not a good look! Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Last edited by Lightwater on 7th Mar 2016 1:39 am. Edited 1 time in total

It attaches via 3 hex head screws in the centre region and 2 u-clip side supports. No drilling is required as the bonnet protector uses the existing holes in the bonnet. All you need to do is insert a plastic threaded plug for each hole.





Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

Cheers matey, get Christmas out the way then I will get one.