Freel2.com - View topic - Rear Wheel Bearing


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Rear Wheel Bearing

Page 1 of 1

Print this entire topic ·

Badger51

Member Since: 01 Mar 2014
Location: Coffs Harbour
Posts: 969

Rear Wheel Bearing

Hi All,

Am about to change a rear wheel bearing on 2008 model & wondered if anyone has a list of torques required for putting it all back together?

Any tips/advice greatly appreciated.

Thanks in advance.

Nick

18th Jan 2015 4:01 am

Badger51

Member Since: 01 Mar 2014
Location: Coffs Harbour
Posts: 969

125 views & not one reply! Very disappointed people.

25th Jan 2015 3:07 am

jlcrompton

Member Since: 06 Nov 2013
Location: bolton
Posts: 229

2007 Freelander 2 i6 HSE Auto Stornoway Grey

I had mine changed by a mate about 6 months ago, I dont know about any torque setting, but he said the whole wheel hub had to come off and his 4 ton press was not strong enough.
The part i got was a britpart bearing for just under £20 from the bay. My he charged me £80 for doing it. Not to bad really. I6 WITH GAS CONVERSION
HST BODY KIT
OSRAM LED DRIVING FOGS
CARS LOOKING GOOOOD!

25th Jan 2015 9:16 am

EYorkshire

Member Since: 18 Nov 2010
Location: (!)
Posts: 4392

Don't be so quick to put down the members, not everyone has access to the information needed.
You will be removing the wheel knuckle so anything associated with that.

Click image to enlarge

25th Jan 2015 9:56 am

Badger51

Member Since: 01 Mar 2014
Location: Coffs Harbour
Posts: 969

Thanks for the response. Would you also have the torque for the Axle/Hub nut?

26th Jan 2015 7:46 am

EYorkshire

Member Since: 18 Nov 2010
Location: (!)
Posts: 4392

Copy/pasted from manual

Nuts and bolts must be tightened with the weight of the vehicle on the suspension.
Do not use air tools to install the nut. Failure to follow this instruction may result in damage to the component.
Tighten both lower arm nuts and bolts.
Torque: 175 Nm
Tighten the trailing arm nut and bolt.

Torque: 270 Nm
Tighten the rear halfshaft nut.

Torque:
Stage 1: 330 Nm
Stage 2: 30°

Stake the hub nut.

26th Jan 2015 9:33 am

wizking

Member Since: 18 Mar 2010
Location: Around
Posts: 1848

2013 Freelander 2 SD4 XS Auto Indus Silver

Badger51 wrote:
125 views & not one reply! Very disappointed people.

You have been a member for near on a year and never given any help to others, and you are disappointed!! All one way mate.

26th Jan 2015 12:45 pm

Badger51

Member Since: 01 Mar 2014
Location: Coffs Harbour
Posts: 969

Touche, but one can only offer help to others if you have the knowledge to be of use! Not knowing a great deal about Freelander 2's, I wouldn't consider my knowledge of use to anyone here yet!

26th Jan 2015 6:51 pm

wizking

Member Since: 18 Mar 2010
Location: Around
Posts: 1848

Exactly, and unfortunately that's why I, and I assume all the others who read your post, were unable to help you.

26th Jan 2015 7:56 pm

taztastic

Member Since: 03 Feb 2011
Location: North West
Posts: 8652

26th Jan 2015 8:31 pm

wizking

Member Since: 18 Mar 2010
Location: Around
Posts: 1848

26th Jan 2015 10:19 pm

Page 1 of 1

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum