Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > General > OIL LIGHT GOES ON WHEN ENGINE IS IDOL |
|
|
alex_pescaru Member Since: 12 Mar 2009 Location: RO Posts: 4642 |
There is a problem when the oil filter is improperly seated and installed.
|
||||
27th Feb 2014 11:24 am |
|
piattj Member Since: 18 Jan 2012 Location: where the crowds aint... Posts: 1235 |
...
|
||
27th Feb 2014 11:28 am |
|
Acciola Member Since: 14 Oct 2012 Location: San Gwann Posts: 55 |
Hi Alex, I forgot to mention that the oil filter wasnt changed during this service. |
||
27th Feb 2014 11:42 am |
|
SYFL2 Member Since: 16 Jun 2012 Location: Sheffield Posts: 2597 |
Why would you change the oil and not the filter ? |
||
27th Feb 2014 12:41 pm |
|
Acciola Member Since: 14 Oct 2012 Location: San Gwann Posts: 55 |
No idea.... I obviously made the wrong choice of mechanic and need to look for another one before the next service.
|
||
27th Feb 2014 1:44 pm |
|
dunkley201 Member Since: 09 Jul 2011 Location: Lincolnshire Posts: 2739 |
Acciola - A "service" is more than changing the oil. To keep your LR2 in top condition it should go to a garage who has at least some knowledge and preferably a Land Rover specialist. See the service check sheet here: https://www.freel2.com/gallery/albums/user...tCheck.PDF This at least tells you what should be done!
|
||
27th Feb 2014 2:48 pm |
|
Acciola Member Since: 14 Oct 2012 Location: San Gwann Posts: 55 |
Thanks for the info dunkley... however your link is broken and cannot access it. Can you kindly send it to me again or email it to henry@copperstonedesign.com please? |
||
27th Feb 2014 2:57 pm |
|
dunkley201 Member Since: 09 Jul 2011 Location: Lincolnshire Posts: 2739 |
Sorry about that Acciola - I should have checked the link. I guess someone has broken it. Try this one:
|
||
27th Feb 2014 3:14 pm |
|
alex_pescaru Member Since: 12 Mar 2009 Location: RO Posts: 4642 |
Here are the maintenance check sheets...
|
||
27th Feb 2014 3:14 pm |
|
Acciola Member Since: 14 Oct 2012 Location: San Gwann Posts: 55 |
OK... Please forgive me as I just spoke to my mechanic and made a mistake... It was the Diesel Filter he didnt change and NOT the Oil Filter... That was changed so now Im thinking that file alex_pescaru first posted could be very relevant.
|
||
27th Feb 2014 4:22 pm |
|
shiggsy Member Since: 13 Jan 2013 Location: Kent Posts: 799 |
Is the Return Valve that the MAHL document mentions in the silver metal section shown or the black plastic filter housing that you unscrew and end up holding in your hand ? It reads like its in the black plastic filter housing but when I changed my filter there was no return valve in it, the filter was a snap fit into the filter housing which had some play in it, so the filter could rattle back and forth but it was locked into the housing.
|
||
27th Feb 2014 5:52 pm |
|
oldgeezer Member Since: 09 Apr 2011 Location: Wiltshire Posts: 1302 |
Do not run or drive until fixed !
|
||
27th Feb 2014 6:12 pm |
|
alex_pescaru Member Since: 12 Mar 2009 Location: RO Posts: 4642 |
It's in the metal housing. On it's bottom. When you start to unscrew the oil filter cover, the oil filter will come out together with the cover. As soon as the filter/cover ensemble will start to rise, the spring loaded valve from the bottom of the metal housing will start to rise/open following the rising filter/cover ensemble. In that moment, the oil inside the cavity will flow back through the opened valve on the sump and when you'll detach the cover with the oil filter you'll find an empty cavity, without oil. |
||
27th Feb 2014 7:23 pm |
|
shiggsy Member Since: 13 Jan 2013 Location: Kent Posts: 799 |
Ok thanks for that, so would I be right in thinking this black circular part is the return valve and if you get your fingers on it you should be able to compress it slightly? If it need changing is just a case of pulling it off and slotting a new one back, or would the whole body have to come off? (wouldn't fancy doing that one).
|
||
27th Feb 2014 8:20 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis