an old post - but still useful information - below

Suspension System - General Information -
Coil Spring Suspension
Wheel Alignment Specification (All Markets) - Front
• NOTE: All figures are with vehicle at 'Showroom' ride height - full fluids, full tank of fuel, no occupants/luggage, tires
inflated to normal pressures
Wheel Alignment Specification (All Markets) - Rear
• NOTE: All figures are with vehicle at 'Showroom' ride height - full fluids, full tank of fuel, no occupants/luggage, tires
inflated to normal pressures
Vehicle Ride Height
• NOTE: All figures are with vehicle at 'Kerbside' (curbside) ride height - full fluids, full tank of fuel, no
occupants/luggage, tires inflated to normal pressures
• NOTE: Ride height is measured vertically from wheel center to underside of wheel arch
Item Specification
Front Front: - Conventional coil spring with a twin tube damper and a high stress stabilizer bar
Rear Rear: - Conventional coil spring with a twin tube damper and a high stress stabilizer bar
Left-hand Right-hand Total/Balance
Camber Decimal degrees -0.50° ± 0.75° -0.50° ± 0.75° 0.0° ± 0.75°
Degrees/minutes -0.30' ± 0.45' -0.30' ± 0.45' 0' ± 0.45'
Castor Decimal degrees 3.25° ± 0.75° 3.25° ±0.75° 0.0°± 0.75°
Degrees/minutes 3°15' ± 0.45' 3°15' ± 0.45' 0.0' ± 0.45'
Total Toe Decimal degrees - - 0.20° ± 0.20°
Degrees/minutes - - 0.12' ± 0.12'

Item Left-hand Right-hand Total Thrust Angle
Camber Decimal degrees -1.95° ± 0.75° -1.95° ± 0.75° - -
Degrees/minutes -1°57' ± 0.45' -1°57' ± 0.45' - -
Toe Decimal degrees 0.17° ± 0.14° 0.17° ± 0.14° 0.33° ± 0.20° 0.0° ± 0.14°
Degrees/minutes 0.10' ± 0.8' 0.10' ± 0.8' 0.20' ± 0.12' 0.0' ± 0.8'

Ride height
Description mm inch
Front 491 ± 12.0 19.32 ± 0.47
Rear 505 ± 12.0 19.86 ± 0.47
Page 1 of 1
http://