Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > General > Headlight Washers
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
losteastview



Member Since: 21 Apr 2013
Location: Lancashire
Posts: 107

United Kingdom 2013 Freelander 2 SD4 HSE Lux Auto Indus Silver
Headlight Washers

Hi,

Can anyone tell me if non working headlight washers are an MOT failure ?

Thanks.

Post #188528 21st Jun 2013 4:55 pm
View user's profile Send private message View poster's gallery Reply with quote
archie98



Member Since: 18 Oct 2011
Location: derbyshire
Posts: 709

England 2007 Freelander 2 TD4 SE Auto Stornoway Grey

not working at all ? they only work when the lights are on every 3rd or 5th go.

Last edited by archie98 on 21st Jun 2013 5:02 pm. Edited 2 times in total

Post #188529 21st Jun 2013 4:57 pm
View user's profile Send private message View poster's gallery Reply with quote
pab



Member Since: 28 Aug 2012
Location: Now in Mid-Wales
Posts: 2007

United Kingdom 2009 Freelander 2 TD4 XS Manual Lago Grey

No, they're not an MoT failure. How do I know? 'Cos my car came back from its last service and MoT with a report that one headlight washer wasn't working! Still passed the MoT.

Post #188530 21st Jun 2013 5:01 pm
View user's profile Send private message View poster's gallery Reply with quote
Dave007



Member Since: 11 Feb 2013
Location: Solihull
Posts: 171

United Kingdom 2010 Freelander 2 TD4 HSE Auto Santorini Black

I thought I read somewhere they were tied in with the xenon headlights ie, if you have xenons then you must have working headlight washers - something to do with the lack of headlight leveling system being fitted?

Just checked around and found this on the AA website:

Lighting

Products on the lens or light source that obviously reduce the light's intensity or change its colour will become a reason for failure – applies to front/rear position lamps, registration plate lamps, stop lamps, rear fog and direction indicators,

Headlight requirements are updated to take account of the particular characteristics of High Intensity Discharge (HID) lamps.

HID headlights can cause dazzle if they are dirty or aimed too high, so they are generally (if light output exceeds 2000 lumens) fitted in conjunction with headlamp cleaning and leveling systems. Where HID or LED dipped beam headlamps are fitted the tester will switch on the headlamps and check the operation of any headlamp leveling and cleaning devices fitted.

The car will fail if a headlamp leveling or cleaning device is inoperative or otherwise obviously defective.

If a headlamp bulb is not seated correctly the resulting beam pattern will be indistinct and this will result in a test fail.


Thought so........ MY2010 TD4 HSE Santorini Black, 19" Alloys, Almond Leather, Lux Pack, Rear Spoiler, Adaptive Xenons

Post #188532 21st Jun 2013 5:10 pm
View user's profile Send private message View poster's gallery Reply with quote
ccsnet



Member Since: 05 Jan 2013
Location: Lancs
Posts: 881

United Kingdom 2007 Freelander 2 TD4 HSE Manual Tambora Flame

As above - if you have Xenons then you NEED washers.... that said a lot of FL2s have them any way so I could see them as optional.

T Terran



'The' Car For The Modern Day UK Roads ( ie all the pot holes )

'A Freelander that leaks oil is just marking its territory' - Wise words

Now a member of the FL2 'Silly Bill' Club

Post #188582 21st Jun 2013 8:27 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site