Hi all

We have been getting flashed by oncoming drivers since we bought our FL2, I've set the headlight height adjuster to the lowest setting however its still pretty high, moving the dial to 50% is similar to full beam!!

I've found the following

https://www.freel2.com/gallery/albums/user...stment.pdf

which will remedy the situation however I'm curious as to why they are so high and if its a sign of something else which needs attention.

Thanks as always :0)[/url]

Check the ride height at the rear, might have got a bit saggy if its been used for heavy load carrying or towing in the past?

Ooo no missis you dont want a saggy rear titter ye not

only thing worse than a saggy rear is a soggy rear!

No hitch on the car so no worries about towing and the height looks inline with the published dimensions.

Parked the car about 15ft away from the wall and marked the high and low points with some electrical tape, then moved the headlamp adjustment dial to mid way point and used an allen key to bring the level down to the lower tape mark, job done