Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Changing coolant/brake fluid |
|
|
EYorkshire Member Since: 18 Nov 2010 Location: (!) Posts: 4392 |
The coolant is marked up for a change in 10 years, I wouldn't bother myself.
|
||
5th Jan 2013 5:01 pm |
|
Mona Geeza Member Since: 22 May 2010 Location: Devon Posts: 1293 |
Mines just had its 3rd service, 60000 by Land Rover and according to the service book they changed the brake fluid and coolant, didnt see the actual bill as they never give me one because I never pay it. |
||
5th Jan 2013 7:15 pm |
|
superspark Member Since: 24 May 2009 Location: Devon Posts: 877 |
The anti freeze/summer coolant will be fine but get the brake fluid changed. Due to the nature of brake fluid and how it absorbs mosture so every three years max is the best policy to have it changed |
||
5th Jan 2013 7:43 pm |
|
valleyboy Member Since: 11 Dec 2010 Location: South Wales. Posts: 223 |
Thanks everyone, for the advice. I'll get the brake fluid done very soon. |
||
6th Jan 2013 7:47 am |
|
chrisg.007 Member Since: 20 Dec 2012 Location: Manchester Posts: 45 |
My local garage samples the brake fluid and works out the boiling point and will advise if its needed. I think its about £40 or thereabouts.
|
||
6th Jan 2013 8:12 pm |
|
Past master Member Since: 30 Jun 2010 Location: Isle of Ely Posts: 2710 |
Strange this brake fluid thing. I've been told every time so far that it doesn't need changing. And that's on an 07 car. |
||
6th Jan 2013 10:22 pm |
|
ad210358 Member Since: 12 Oct 2008 Location: Here and There Posts: 7464 |
I was told the same, it's checked for water content, then a decision is made, but Liam@lr has said it should be changed at three years.
|
||
6th Jan 2013 10:37 pm |
|
chrisg.007 Member Since: 20 Dec 2012 Location: Manchester Posts: 45 |
Hi, I gather from the reply's that 3 years is possibly a guideline. I think that taking a sample and mesuring to water content and boiling point is the more practical approach. Maybe its garages trying to cash in on a manufactureres guideline.
|
||
7th Jan 2013 2:21 pm |
|
geoffk Member Since: 11 Jan 2008 Location: chester Posts: 164 |
Yesterday i went to get a litre of brake fluid from my local dealer..
|
||
28th Mar 2013 2:55 pm |
|
JST Member Since: 01 Nov 2011 Location: Lizant Posts: 1098 |
I bought a genuine fuel filter from fleabay for £23. Always worth a look! John
|
||
28th Mar 2013 6:03 pm |
|
roland90 Member Since: 25 Feb 2013 Location: England Posts: 33 |
I would ask where they sample the brake fluid? Its no use sampling in the fluid reservoir as this will be fairly clean and fresh. Its in the cylinders that you need to flush which is where any water will be and degraded fluid due to the effects of heat. |
||
14th Apr 2013 9:17 am |
|
Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4109 |
The reservoir is the only place moisture can be absorbed so that is where it is tested. How can moisture be absorbed in the wheel cylinders? Past: FL2 TD4 HSE Auto
|
||
14th Apr 2013 12:31 pm |
|
JST Member Since: 01 Nov 2011 Location: Lizant Posts: 1098 |
Water drops to the bottom in oil and brake fluid so get some in at the top and it will find it's way down the the wheel cylinders. Also, if you get the brakes hot and then you drive through water/puddles, the sudden cooling of the hot wheel cylinders/callipers can cause a vacuum affect which can draw moisture in past the seals. This is why you should check/change axle oil if you have been doing serious wading with hot axles. John
|
||
14th Apr 2013 2:23 pm |
|
roland90 Member Since: 25 Feb 2013 Location: England Posts: 33 |
Just look at the dirty dark colour of the fluid from the cylinders next time you bleed the brakes. |
||
14th Apr 2013 2:59 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis