Freel2.com - View topic - SSM61017 - LR2 / Freelander 2


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > SSM61017 - LR2 / Freelander 2 – click noise from drive shaft

Page 1 of 1

Print this entire topic ·

bell-auto-services

Member Since: 21 Nov 2006
Location: North Yorkshire
Posts: 45

SSM61017 - LR2 / Freelander 2 – click noise from drive shaft

Reference SSM61017
Models Freelander 2 / L359

Title LR2 / Freelander 2 – click noise from drive shafts / half shafts
Category Driveline
Last modified 03-Dec-2012 00:00:00
Symptom 597997 Driveline Noise Concerns
Content Issue: The customer reports a click noise while manoeuvring at low speeds – LR2 / Freelander 2 only. The issue is identified as a click noise from a drive shaft (half shaft).

Cause: Small amount of movement of the splines of the shaft within the hub.

Action: A bead of Loctite 648 should be applied 10mm below the circlip on the shaft. See attached diagram. Follow TOPIx section 205-04 or 205-05 for shaft removal and re-fit process. The Loctite must be sourced locally.

3rd Dec 2012 8:30 pm

npinks

Member Since: 28 Jun 2007
Location: Ls25
Posts: 20090

Nice one

I assume this is a new TSB for those that click, thanks for posting it

Last edited by npinks on 3rd Dec 2012 8:45 pm. Edited 1 time in total

3rd Dec 2012 8:35 pm

bell-auto-services

Member Since: 21 Nov 2006
Location: North Yorkshire
Posts: 45

Yes new out

3rd Dec 2012 8:38 pm

Page 1 of 1

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum