Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Maintenance & Modifications > 2008 FL 2.2 TD4 ..... Egr blanking?? |
|
|
fredastaire Member Since: 03 Dec 2012 Location: Holbrook Posts: 721 |
This mod is DIY for pre facelift (before mid 2010); I've run mine now for one year with EGR blank and two stroke.
|
||
13th Dec 2014 3:28 pm |
|
cqr Member Since: 05 Mar 2013 Location: kent Posts: 1308 |
Thank you, Fred
|
||
13th Dec 2014 7:08 pm |
|
fredastaire Member Since: 03 Dec 2012 Location: Holbrook Posts: 721 |
Fact, there are no software mods for preface lift cars.
|
||
15th Dec 2014 11:22 am |
|
cqr Member Since: 05 Mar 2013 Location: kent Posts: 1308 |
Thanks for the info 👍
|
||
16th Dec 2014 4:43 pm |
|
fredastaire Member Since: 03 Dec 2012 Location: Holbrook Posts: 721 |
My only extra comment is to reccomend gasket sealer. I missed that and have a minuscule oil mark at the joint.
|
||
16th Dec 2014 5:16 pm |
|
cqr Member Since: 05 Mar 2013 Location: kent Posts: 1308 |
Thanks 😄😄 |
||
16th Dec 2014 5:21 pm |
|
RogB Member Since: 16 Dec 2014 Location: Mansfield Posts: 3880 |
ive got an egr blanking plate ready for a mate to fit it for me. Hes a mechanic for Skoda but I would still like to know exactly where the EGR is under the bonnet so pictures would be good to see for the location. |
||
16th Feb 2016 10:27 am |
|
pab Member Since: 28 Aug 2012 Location: Now in Mid-Wales Posts: 2007 |
The EGR valve is located at the back of the engine (as you look at it) above the exhaust manifold, but the blanking plate is fitted where the pipe from the EGR joins the inlet manifold, as shown in the image below. Once the engine cover is off it's easily accessible and very easy to fit the blanking plate. N.B. The pipe is rigid, so slacken off the bolt half way along to make it easier to separate the pipe from the inlet manifold.
|
||
16th Feb 2016 12:09 pm |
|
Tomtom Member Since: 30 Apr 2017 Location: Brisbane Posts: 23 |
DELETE. (found a newer topic on the same thing) |
||
6th Jul 2017 10:54 am |
|
Vyacheslav Member Since: 19 Mar 2019 Location: Rostov Posts: 4 |
Good afternoon. Not found anywhere in the firmware to disable the usr. Nobody did? |
||
22nd Mar 2019 2:43 pm |
|
ribama1 Member Since: 12 May 2021 Location: brisbane Posts: 73 |
Old thread but thought I would add that you need to remove the MAP sensor when installing the EGR blanking plate. But that is very easy to do...just one bolt.
|
||
3rd Oct 2021 1:26 pm |
|
RRBlue Member Since: 06 Sep 2019 Location: Cambridge Posts: 60 |
Fitted plate to 2010 FL2 2.2 TD with 170k on the clock. No immediate difference. Been in place for 15k and no adverse side effects. I just hope that the systems has had time to clear out all that crap from the induction system.
|
||
25th Feb 2022 5:21 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis