Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > General > Snow driving |
|
|
defkalion Member Since: 17 Feb 2007 Location: Athens Posts: 350 |
Hi everybody
|
||
16th Dec 2007 10:37 am |
|
Tim in Scotland Member Since: 12 Mar 2006 Location: All at sea Posts: 875 |
Not much use using the outside temperature gauge as a guide as to whether or not to inhibit ABS. The snowflake symbol that comes up is purely a warning that there is a possiblity of black ice and also it registers the air temperature not the road surface temperature which is the critical one for black ice formation. You would not be a happy bunny if you stamped on the brake and the wheels locked up on an "all weather" chipping surface when you were expecting the ABS to cut in but didn't because the snowflake reckoned that it was icy.......... better to use the TR's snow setting in icy conditions as that remaps the entire engine/ brake and (if an automatic) the gear change points to suit the conditions.
|
||
16th Dec 2007 1:47 pm |
|
npinks Member Since: 28 Jun 2007 Location: Ls25 Posts: 20090 |
Def. What you did is correct for snow conditions according to what the bloke at my LR Experience told me,. Brake till the ABS kicks in a release slightly, press a little more to find the fine line between ABS/no ABS Don't use the technique on your dry hot summer roads though!!!! but sand or wet grass is ok Former Mod/Member, with the most post & Chicken George Arch nemesis |
||
16th Dec 2007 3:17 pm |
|
Tim in Scotland Member Since: 12 Mar 2006 Location: All at sea Posts: 875 |
That cadence braking method allows a "wedge" of snow, mud or sand to build up in front of the wheels that the ABS doesn't allow to form How can carbon have a footprint, it has no feet?
|
||
16th Dec 2007 7:25 pm |
|
npinks Member Since: 28 Jun 2007 Location: Ls25 Posts: 20090 |
The is nothing to do with ABS but show the LR testing ground for snow and the FL2
|
||
17th Dec 2007 11:43 pm |
|
gorjant Member Since: 10 Dec 2006 Location: Macedonia Posts: 65 |
I suppose winter tires will help? Really, How does Fl2 handle snow driving (mild snow and ice) with the standard tires fitted? |
||
18th Dec 2007 8:30 am |
|
SkyDive Member Since: 14 Sep 2007 Location: Athens Posts: 65 |
I experienced the same thing as you(i pushed the brakes hard for a test).That happend due to ice that was present (Top of mountain Pedeli) an it is absolutely normal! Besides engaging snow mode on the tr console Id recomend you switch to serial mode and use the gears to slow down the car in similar conditions. That helped me alot when descending from totaly covered with ice roads in the mountain, (i hardly ever hit the brakes) and the car behaved like it was on dry tarmack!.Overal the FL2 had absolutely no problem dealing with snow (5-10cm) and ice! thumbsup: |
||
18th Dec 2007 3:09 pm |
|
scotster Member Since: 29 Oct 2007 Location: Richmond, West London. Posts: 241 |
There is a long long post on this elsewhere debating the value of ABS in snow. Viking from Norway says that you'd be a fool to switch it off and posts a convincing video of Tiff demonstrating with and witout ABS on snow.
|
||
18th Dec 2007 6:29 pm |
|
VIKING Member Since: 22 Sep 2007 Location: Stavern, NORWAY Posts: 389 |
Thank you Scotster. I have monitored this post, and decided to stay out of it. But, I can no longer stay out of it.
|
||
18th Dec 2007 6:57 pm |
|
djhampson Member Since: 08 Sep 2007 Location: Brisbane Posts: 124 |
Exactly. You are mad to turn ABS off EVER! VIKING is right that ABS helps in two ways... its stops the car quicker and gives you a chance to steer around an obstacle. It also stops you from spinning if one side of the vehicle has a lot more grip than the other. Eg if the road has been cleared of snow in the middle but not on the passengers side and you lock the wheels up the car can spin or slide because of the difference in grip on each side of the car. The other problem with allowing a wedge of snow, mud or sand to help slow the vehicle is you can't always be 100% certain that the snow, mud or sand in front of you is deep and soft enough to enable that wedge to build up. The only other thing you should be doing is leaving a HUGE gap and travelling at a safe speed when the road is icy. |
||
19th Dec 2007 3:21 am |
|
gorjant Member Since: 10 Dec 2006 Location: Macedonia Posts: 65 |
If disabling ABS was a good idea on snow and ice, I suppose LR would made the TR system dampen the ABS when in snow mode (like it does to the DSC in sand mode) but it doesn't . The thing you should do (as I mentioned earlier) is put winter tires which would make better traction and shorter braking distances on snow/ice. |
||
19th Dec 2007 7:43 am |
|
defkalion Member Since: 17 Feb 2007 Location: Athens Posts: 350 |
Since my post started all this , let me just make one thing clear: DSC, TR etc work great in snow conditions. My only observation was that when braking ABS gets engaged quite easily. Compared to previous cars I owned this was not the case. In FL2 the braking distance is much greater - maybe the vehicle weight plays an important role. It is just my opinion that while ABS is active in such conditions, braking distance gets much bigger. I would never have thought of disabling ABS (don't think it's possible anyway). However let me also note that on ice and while ABS is active (and very sensitive) it would be very difficult to turn anyway, unless you have tires with studs. The last snow here was very mild, so I'll be expecting the next big white event and let you know asap (maybe if I get the time will travel a bit higher today just to check). |
||
19th Dec 2007 8:51 am |
|
muddywheels Member Since: 02 Oct 2007 Location: East Riding of Yorkshire Posts: 939 |
I have to disagree with this from experience! I pushed the peddle to the floor in a Ford Mondeo with ABS in 1995 on snow and Ice and turned the wheel to avoid a Barn on a bend. The car kept going straight with the ABS clicking and I ran straight into the Barn. The only thing that saved me and my wife were the airbags! This was my first car with ABS and airbags and I have made sure every car since then had them The best way to stop on snow and Ice is using the engine and gears with light braking especialy with 4wd because you can use 4 wheels friction instead of 2. |
||
19th Dec 2007 9:20 am |
|
VIKING Member Since: 22 Sep 2007 Location: Stavern, NORWAY Posts: 389 |
Defkalion, you are quite right about this. There is put out a general warning to SUV's here in Norway to remember that due to the heavy weight of the SUV's, a longer braking distance is required. Due to the very good driving-abilities for SUV's on snow and ice, many seem to forget the heavy weight of the car. So actually there is a warning out for SUV's to be extra careful going down hill. I have always concidered going up hill as a challenge, never down hills. With SUV's it is the other way around. Due to the weight. So when on ice: Remember you are driving a heavy car, and need more braking distance. But Muddywheels; Were you speeding a little when colliding into that barn? Allthough ABS is great, it is just a little help, -not a mean to break the laws of physics. If your speed is too high concidered against the grip the car has on the road, not even the ABS will help you. 2008 Freelander 2 HSE TD4 Automatic, Caspian Blue, Alpaca, Moon roof, Exclusive pack. |
||
19th Dec 2007 10:53 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis