How do you set the seat memory? Nothing in the handbook I have.

If you have the standard handbook, you'll find what you're looking for at page 50...

If you don't have the handbook, you'll find it here: http://topix.landrover.jlrext.com/topix/vehicle/lookupForm
In the Owner section, after you select the car and its MY.

Thanks Alex but my page 50 is about cup holders and storage! My handbook is the 2010 edition LRL 10 02 56 111.

On page 35 its all about the automatic garage door opener, and its upsetting the wife every time she has to get out to manually lift up the door!!!

I take it that you still have the black SE - it doesn't have the memory function - just the power seats.

Wonder if it could be enabled via diagnostics? Probably just flipping a bit on the CEM config is all it requires  Discovery 4 HSE - Aintree Green
Freelander 2 TD4 SE Automatic - Tonga Green
Defender XS - Tonga Green - Gone Now
Freelander 1 Td4 ES Manual - Epsom Green - Gone Now *
Freelander 1 Td4 Kalahari SE - Epsom Green - Gone Now
Freelander 1 XEi - Epsom Green - Gone Now

www.greenlandrover.uk

Moved on from the SE, now got the HSE. It's brilliant, just that the wife wants to drive it, she is 5ft 2ins and I am 6ft 3ins.

AFAIK memory seats are 8 way adjustable while normal electric seats are 6 way adjustable. Vehicles with memory seats also have dipping door mirrors when reverse is selected. Different seat controls on memory and non-memory seats and as such don't think it is possible to enable via diagnostics.

Standard seats on SE are electric but not memory.

The drivers side seat has three buttons numbered 1 2 3, which are in addition to the adjustment buttons.

WGG1848 wrote:

Thanks Alex but my page 50 is about cup holders and storage! My handbook is the 2010 edition LRL 10 02 56 111.

Then you'll find the info on page 12.

WGG1848 wrote:

The drivers side seat has three buttons numbered 1 2 3, which are in addition to the adjustment buttons.

If you have the 'Memory' button close to the other buttons, adjust the seat and mirrors until your happy with them, including the auto dip when in reverse if you have it! press the memory button and one of the numbered choices "from memory I think the ignition has to be on with the display active" within a few seconds of each other and if you've done it right, you should hear a ping notifying you the position is stored in memory.

Will try tomorrow, thanks.