Wasn't sure whether I should have put this in "Technical", "In Car Electronics" but went for this one in the end. Apologies if I got wrong section

Basically want to install a power socket in the boot of my 2007 Freelander 2. I fitted the LR kit in the Freelander 1 which worked great for the cooler box.

I've seen these 2 posts: -

https://www.freel2.com/forum/post110111.html and

https://www.freel2.com/forum/topic1062.html

also wildrover's installation here: -

https://www.freel2.com/gallery/index.php?cat=10531

I have no problems doing this but I was wondering if Land Rover offer a retro fit kit like they did with the Freelander 1 or is just a case of buy a socket and making up your own wiring loom? The reason for asking is that if there's a kit there might be some fitting instructions that might give some clues how to do a DIY job

Had a look on http://lrparts.net.ru/ and http://topix.landrover.jlrext.com/ but can't find anything.

If no kit available, is there a recommended socket to fit so it looks in keeping with the rest of the vehicle?


Cheers Discovery 4 HSE - Aintree Green
Freelander 2 TD4 SE Automatic - Tonga Green
Defender XS - Tonga Green - Gone Now
Freelander 1 Td4 ES Manual - Epsom Green - Gone Now *
Freelander 1 Td4 Kalahari SE - Epsom Green - Gone Now
Freelander 1 XEi - Epsom Green - Gone Now

www.greenlandrover.uk

Don't know if the wiring will be behind the left boot panel but the socket goes just below the boot space light, and the socket only is part No.LR007412 around £4.00.

Richard FL2 07 TD4 GS Auto
Ex 02 TD4 Auto

Thanks for that I've got the socket on order  Discovery 4 HSE - Aintree Green
Freelander 2 TD4 SE Automatic - Tonga Green
Defender XS - Tonga Green - Gone Now
Freelander 1 Td4 ES Manual - Epsom Green - Gone Now *
Freelander 1 Td4 Kalahari SE - Epsom Green - Gone Now
Freelander 1 XEi - Epsom Green - Gone Now

www.greenlandrover.uk