I have started to notice that known knocking sound that sounds like it's coming from the glove box but is actually a loose screw or bolt behind the indicator grille in the nearside wing.

Now there is always RTFM but the easy step by step instructions usually turn out to be anything but. So, those of you who have had this issue and resolved it, how did you find the procedure. A bit of a faff perhaps? LL.B (Hons) - University of Derby
LOT (Lord of Time) - University of Gallifrey

It's a two minute job Doc. You only need to remove the passenger side repeater indicator not the grill, and then tighten the bolt.

Thanks

Again, short of RTFM, I take it the repeater is easy to remove. LL.B (Hons) - University of Derby
LOT (Lord of Time) - University of Gallifrey

Yes Doc it is simple - just look in your Owner's Manual under "Lighting" chapter where upon the lads n lasses at LR have drawn you an idiot diagram.

Just pull it to the left or right then remove, it's just held against a spring.