How easy to fit are they - whats involved ? 09 Plate Rimini Red Freelander 2 HSE with Roofrails, Side Mouldings, Sidetubes and Privacy Glass

I got the dealer to do this to for the same reason as the bumper cover. Not sure about rears but fronts drill into the wings though I don't know what holds them in place if you don't have the styling cover as I do as they seem to clip into the side of that. (Past) Freelander 2 HSE 2010 MY In Rimini Red.
(Past) RR Evoque Dynamic Lux Si4 In Firenze Red.
(Past) RR Evouque Pure Tech in Barollo Black with bespoke Firenze Red colour coding.
(Present) Freelander Metropolis 2015 MY In Santorini Black with Ivory Premium Leather.

I have just fitted front light guards to mine this week. The part requiring the most care is drilling into the wings. But the instructions are well thought out, use the masking tape for grip and supplied template... stainless steel rivets hold the bracket in place, but instead of using the supplied rivets I used a plastic raw plug which fits snug and adds a plastic barrier (with plenty of waxoyl) to prevent corrosion. They fit really well and if the raw plugs fail over time I'll get to a LR dealer to fit the rivets properly... but I don't think it will come to that.

Hope this helps, Respect due!

Hi

Have a look at Land Rovers site - you can download all the instruction leaflets

http://www.freel2.com/forum/topic422.html

Borisk wrote:

I have just fitted front light guards to mine this week. The part requiring the most care is drilling into the wings. But the instructions are well thought out, use the masking tape for grip and supplied template... stainless steel rivets hold the bracket in place, but instead of using the supplied rivets I used a plastic raw plug which fits snug and adds a plastic barrier (with plenty of waxoyl) to prevent corrosion. They fit really well and if the raw plugs fail over time I'll get to a LR dealer to fit the rivets properly... but I don't think it will come to that.

Hope this helps,

Does anyone have the template for marking the holes for drilling as mine seem to be missing any help very much appreciated