![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > General > Towbars and electrics |
![]() ![]() |
|
|
dunkley201 Member Since: 09 Jul 2011 Location: Lincolnshire Posts: 2739 ![]() ![]() ![]() |
The Gold Plated solution is to fit a LR dedicated kit or one from Witter, or a guy called "rightconnection". However, these only come into their own on the auto as the gearbox gets re-coded too when the trailer is connected. Also the parking warning. As you have a manual (as I do) a simple by-pass system can be fitted. All the connections are in the boot in the JB under the floor panel. I did not wire mine, it was done already! 10MY (Sept 09) TD4 HSE Auto in Stornoway Grey (Now Gone)
|
||
![]() |
|
V8stagman Member Since: 28 May 2013 Location: Chester, uk Posts: 24 ![]() ![]() ![]() |
Jb?
|
||
![]() |
|
dunkley201 Member Since: 09 Jul 2011 Location: Lincolnshire Posts: 2739 ![]() ![]() ![]() |
Junction box - forward and left of the spare wheel well. 10MY (Sept 09) TD4 HSE Auto in Stornoway Grey (Now Gone)
|
||
![]() |
|
V8stagman Member Since: 28 May 2013 Location: Chester, uk Posts: 24 ![]() ![]() ![]() |
Thanks. Bypass relay specifically for my car or will any generic one do?
|
||
![]() |
|
dunkley201 Member Since: 09 Jul 2011 Location: Lincolnshire Posts: 2739 ![]() ![]() ![]() |
As I said, I didn't fit mine as the car had the tow bar on already. I just got an auto electrician to change it to a 13-pin socket although I have done my own wiring in the past. There are several threads on here referring to tow bars, try a search. I am sure a generic by-pass relay is all that is needed. If you are stuck, I can take a look at mine.
|
||
![]() |
|
V8stagman Member Since: 28 May 2013 Location: Chester, uk Posts: 24 ![]() ![]() ![]() |
Thanks. I'll have a look round the forum. Too many cars, too little time |
||
![]() |
|
dunkley201 Member Since: 09 Jul 2011 Location: Lincolnshire Posts: 2739 ![]() ![]() ![]() |
I lifted this from a post by "fredastaire". I'm sure he wont mind. |
||
![]() |
|
EYorkshire Member Since: 18 Nov 2010 Location: (!) Posts: 4392 ![]() |
Additionally dedicated looms will disable start/stop on a TD4e when a trailer of any sort that has lights is hitched up, so there is a small benefit for non auto's |
||
![]() |
|
topaz Member Since: 09 Oct 2013 Location: Essex Posts: 94 ![]() ![]() ![]() |
I bought the genuine LR towing electrics 13 pin kit vplft0077 witch LR sells for £287. I did not realise at the time that this would not fit my MY13 FL2 as I have now found out that itonly fits MY06 to MY12. LR brought out plug and play towing electrics for the MY13 onwards so the set I now have is of no use to me and I will probably put it on fleabay at some time or other, |
||
![]() |
|
V8stagman Member Since: 28 May 2013 Location: Chester, uk Posts: 24 ![]() ![]() ![]() |
So this kit would work straight away on my 2012 model? 13 pin?, think I'd need a converter to the old style 7 pin. If you're selling what price did you have in mind? Pm please
|
||
![]() |
|
topaz Member Since: 09 Oct 2013 Location: Essex Posts: 94 ![]() ![]() ![]() |
Did you get pm as not sure if I done it right? |
||
![]() |
|
V8stagman Member Since: 28 May 2013 Location: Chester, uk Posts: 24 ![]() ![]() ![]() |
Yes thanks. Going to phone local fitter for full install price. Will be in touch
|
||
![]() |
|
topaz Member Since: 09 Oct 2013 Location: Essex Posts: 94 ![]() ![]() ![]() |
Save yourself a bundle, the tow bar is fairly simple to fit for a keen DIYer and the LR electrics are just a plug in and again fairly simple to fit. The hardest part seems to be to take off the rear bumper and light cluster. |
||
![]() |
|
V8stagman Member Since: 28 May 2013 Location: Chester, uk Posts: 24 ![]() ![]() ![]() |
Just had a price of almost £500 but thats the bar, correct electrics and reprogramming. Yikes!
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
